Nmhunter48

• Rockchip Batch Tool 1.8 Download
• Android Multi Tool
• Rockchip Androidtool V2.1
• Rockchip Batch Tool
• Rockchip Firmware Tool
• Rockchip Android Tool & Driver

Rockchip tool is used for Android OS installation on Tablet. The installation of operating system on Tablet is termed as Flashing.

Idea3399 is a single board computer equipped with RK3399 Cortex-A72 + Quad Cortex-A53 processor coupled with 4GB RAM, 8GB eMMC, an mPCIe slot for cellular connectivity, and other interactive interfaces geared towards to AI and IoT Applications. Display features include a mDP port, HDMI and MIPI LCD. Rockchip android tool v2.1 اذا كانت هذه هى زيارتك الاولى, يرجى التأكد من زيارة الاسئلة والاستفسارات. واذا كنت تود المشاركة يتوجب عليك التسجيل. Install Manually. Download driver file first. For WinXp,Vista,Win7,Download the file (usbdriverv3.5.zip) from here. For Win8 Download the file (usbdriverv3.7.zip) from here. Shut down the Rockpi then connect the Rockpi to the computer and let the board go to Maskrom mode. After your computer should detect the board and you will see an. Androidtool does not work with Windows10,Firefly Open Source Community. Open the auxiliary access. Look at the end of the video RockChip Software Batch Tool v1.8.

The Possible reasons for OS installation are maybe the OS might get corrupted, Tablet get stuck at boot menu, processing speed has gone up, tablet hang at various operation, without doing anything it get on/off on their own, application not working etc.

In order to recover from this faults you have to reinstall OS on Tablet. This process is completely different from that of PC.

To install OS on Tablet certain files are needed-
i- Android OS file (Compatible with Tablet)
ii- Software tools (Rockchip)
Download the Tool

Tablet should have 30-40 percent battery to perform the flashing process.

Steps to use Rockchip android Flashing tools –

This is a common guide for reflashing RockChip based devices. All RK SoC (RK3066, RK3188, RK3288, RK3229, RK3328, RK3399 and so on) supports the same applications and drivers for Host system, if 3rd party producers do not add any other limitations or special options.

i) Download Android ADB driver and install it.
ii) Download and extract Rockchip tool on PC.
iii) Open RKBatchtool.exe from extracted file.
iv) After launching the interface of Rockchip tool

v) Now click on the box and add file inside the firmware. After it, Loading of firmware starts.

vi) Now go to Device manager, right click on unknown device and click on update driver software. But if you have downloaded it, then browse the location of USB driver and click on install.

vii) Now connect USB or Auto-ignition wire to the tablet.
viii) Press and hold power+volume up+volume down key.
ix) Now green symbol appear which shows the tablet has been connected to the tool.

x) Now click on upgrade to download Firmware, it would take 10-15 min depending upon internet speed.
xi) After downloading completes, switch on the tablet.

The OS has been reinstall. See the working of Rockchip tool for Android installation on Micromax Funbook P362.

This is a common guide for reflashing RockChip based devices. All RK SoC (RK3066, RK3188, RK3288, RK3229, RK3328, RK3399 and so on) supports the same applications and drivers for Host system, if 3rd party producers do not add any other limitations or special options. Differences can be in hardware parts, so you need to detect OTG port and recovery buttons correctly.
Notice: this guide is 100% working with Ugoos RK devices.

BEFORE START

What do you need:

- Image file
- Host PC
- USB OTG Cable
- Supported host OS: Windows XP (32/64bit) Windows 7 (32/64bit) Windows 8 (32/64bit) Windows 10 (32/64bit)

The first thing you need is to download the archive with firmware. Inside archive, you find:

- BatchTool or Android Tool - tool for reflashing (separate Android Tool and drivers you can download HERE)
- DriverAssitant - tool to install drivers and firmware image file
- Firmware image

INSTALLING DRIVERS

Launch RK DriverAssitant and press “Install Driver”

Apply all changes and warnings during installation until finishing message

CONNECTING TO PC

Run Batch tool or Android tool on your host PC.

In order to connect device with Host PC and run bootloader mode you should perform following steps:

1. Plug off device power adaptor.

2. Connect device to computer via usb OTG port, much better to use certified OTG USB cable from package.

Rockchip Batch Tool 1.8 Download

3. Run Batch tool or RK Android tool

4. Hold the hardware recovery button.

5. Plug in power adaptor and Turn on device if not turning on automatically.

Tip: if you can’t hold recovery button or it’s broken you can reboot to bootloader from Ugoos power menu.

RECOVERY BUTTONS AND OTG USB PORTS LOCATION ON UGOOS DEVICES YOU CAN SEE IN THE END OF THIS INSTRACTION.

IF YOU USE ANDROID TOOL:

In Android Tool choose “Upgrade Firmware” tab. If you did everything correctly and the RK driver installed properly on your computer, ANDROID TOOL shows you message “Found One Loader Device “

Click “Firmware” button and specify the path to the firmware file. You need to wait until the program download information about the firmware, then it will display report on the screen. Now click “Upgrade” button to start reflashing device. At the end, you will see a report indicating a successful operation.

For flashing dualboot or clear linux firmware (for example dualboot UT3/UT3s/UM3 firmwares)

Android Multi Tool

Run Android Tool. If you did everything correctly and the RK driver installed properly on your computer, ANDROID TOOL shows you message “Found One Loader Device “ In Android Tool choose “Download Image” inset. Default program configured to flash 'clear' android on your device. If you want install “Dualboot” or “Clear Linux” click right mouse button by program window, and then select “Load config”.

3. Then choose one of configurations files:

 config.cfg - if want flash only Android

 config_dualboot.cfg - if want flash dualboot

 config_linux.cfg - if want flash only linux

3. Now click the “Run” button to start reflashing device. At the end, you will see a report indicating a successful operation.

IF YOU USE BATCH TOOL:

Main difference between Android tool and Batch tool is Batch tool can reflash several devices at the same time (6 max).
Run the Rockchip Batch Tool and click on the “…” to choose file with firmware. If you did everything correctly and the driver is installed on your computer, you will see green light on one of the indicators.

Now click the “Upgrade” button to the firmware of the device. At the end, you will see a report indicating a successful operation.

OTG usb ports and recovery buttons on Ugoos devices:

Ugoos UT4/UT3+/UT6

Recovery button and USB OTG port is on the right side

Rockchip Androidtool V2.1

Ugoos UT3/UT3s (old version)

Recovery button and USB OTG port is on the right side

Ugoos UM3/UM4

Recovery button is from the left to antenna connector

OTG USB port is left one.

Rockchip Batch Tool

Ugoos UT5 Pro
Ugoos UM2

Ugoos UT2

Rockchip Firmware Tool

Ugoos UT1

Rockchip Android Tool & Driver

Find us: